When to Pre-Drill

Ask twenty do-it-yourselfers how important pre-drilling is, chances are you’ll get at least ten different answers.

So, is pre-drilling necessary or just an added step almost never needed? That depends on many factors.

You need to pre-drill if:

  • You are using green wood. If the piece of wood you are drilling is heavy for it’s size, it is likely green, or young, wood OR
  • You are using treated wood. Treated wood is usually used for outdoor structures or decks OR
  • You are using hardwood. Birch, cherry, mahogany, maple, oak, poplar, rosewood, teak and walnut are all hardwoods OR
  • Your final hole will be larger than 3/8” OR
  • The wood you are using has been stored in humidity greater than 20% for more than 24 hours before drilling OR
  • You want to pre-drill.

You do not need to pre-drill if:

  • You are using dry wood that has not been pressure or chemically treated AND
  • You are using softwood like pine, cedar or redwood AND
  • The final hole will be smaller than 3/8” AND
  • The wood has been stored in dry conditions for more than 24 hours AND
  • You don’t want to.

Pre-drilling Tips

  • If you don’t pre-drill treated or green wood, it will likely split when it dries.
  • Hardwood typically takes years to completely dry so you should always pre-drill hardwood, since it’s possible it still has drying to do.
  • Holes larger than 3/8” can put undo stress on wood. If you pre--drill these holes before inserting a screw or nail, most of the wood will be removed from the hole before nail or screw is inserted, reducing stress.
  • Always pre-drill with a bit slightly smaller than the final hole.
  • If the final hole will be 3/4” or larger, pre-drill in increments of 1/4". Example: pre-drill with 1/4” bit, then 1/2" bit, then 5/8” or 11/16” bit.
     

Tools and construction tips:
Types of tools
Garage and home construction
Outdoor DIY projects
Heavy construction equipment
Industrial construction

 

©, All Drill Bits.com
All rights reserved worldwide. Always use safety precautions when using tools. Follow manufacturers instructions. The content on this site is the authors opinion only and not to be confused with professional advice.

  All Drill Bits .com

Disclaimers

Buy drill bits

Drill bit guide